Define Custom Response Distributions with brms

Paul Bürkner

2024-09-23

Introduction

The brms package comes with a lot of built-in response distributions – usually called families in R – to specify among others linear, count data, survival, response times, or ordinal models (see help(brmsfamily) for an overview). Despite supporting over two dozen families, there is still a long list of distributions, which are not natively supported. The present vignette will explain how to specify such custom families in brms. By doing that, users can benefit from the modeling flexibility and post-processing options of brms even when using self-defined response distributions. If you have built a custom family that you want to make available to other users, you can submit a pull request to this GitHub repository.

A Case Study

As a case study, we will use the cbpp data of the lme4 package, which describes the development of the CBPP disease of cattle in Africa. The data set contains four variables: period (the time period), herd (a factor identifying the cattle herd), incidence (number of new disease cases for a given herd and time period), as well as size (the herd size at the beginning of a given time period).

data("cbpp", package = "lme4")
head(cbpp)
  herd incidence size period
1    1         2   14      1
2    1         3   12      2
3    1         4    9      3
4    1         0    5      4
5    2         3   22      1
6    2         1   18      2

In a first step, we will be predicting incidence using a simple binomial model, which will serve as our baseline model. For observed number of events \(y\) (incidence in our case) and total number of trials \(T\) (size), the probability mass function of the binomial distribution is defined as

\[ P(y | T, p) = \binom{T}{y} p^{y} (1 - p)^{N-y} \]

where \(p\) is the event probability. In the classical binomial model, we will directly predict \(p\) on the logit-scale, which means that for each observation \(i\) we compute the success probability \(p_i\) as

\[ p_i = \frac{\exp(\eta_i)}{1 + \exp(\eta_i)} \]

where \(\eta_i\) is the linear predictor term of observation \(i\) (see vignette("brms_overview") for more details on linear predictors in brms). Predicting incidence by period and a varying intercept of herd is straight forward in brms:

fit1 <- brm(incidence | trials(size) ~ period + (1|herd),
            data = cbpp, family = binomial())

In the summary output, we see that the incidence probability varies substantially over herds, but reduces over the course of the time as indicated by the negative coefficients of period.

summary(fit1)
 Family: binomial 
  Links: mu = logit 
Formula: incidence | trials(size) ~ period + (1 | herd) 
   Data: cbpp (Number of observations: 56) 
  Draws: 4 chains, each with iter = 2000; warmup = 1000; thin = 1;
         total post-warmup draws = 4000

Multilevel Hyperparameters:
~herd (Number of levels: 15) 
              Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept)     0.76      0.22     0.41     1.27 1.00     1538     1893

Regression Coefficients:
          Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept    -1.40      0.26    -1.92    -0.89 1.00     2284     2565
period2      -0.98      0.31    -1.63    -0.38 1.00     4463     2962
period3      -1.13      0.33    -1.78    -0.51 1.00     4994     3499
period4      -1.61      0.44    -2.48    -0.79 1.00     4565     2939

Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).

A drawback of the binomial model is that – after taking into account the linear predictor – its variance is fixed to \(\text{Var}(y_i) = T_i p_i (1 - p_i)\). All variance exceeding this value cannot be not taken into account by the model. There are multiple ways of dealing with this so called overdispersion and the solution described below will serve as an illustrative example of how to define custom families in brms.

The Beta-Binomial Distribution

The beta-binomial model is a generalization of the binomial model with an additional parameter to account for overdispersion. In the beta-binomial model, we do not predict the binomial probability \(p_i\) directly, but assume it to be beta distributed with hyperparameters \(\alpha > 0\) and \(\beta > 0\):

\[ p_i \sim \text{Beta}(\alpha_i, \beta_i) \]

The \(\alpha\) and \(\beta\) parameters are both hard to interpret and generally not recommended for use in regression models. Thus, we will apply a different parameterization with parameters \(\mu \in [0, 1]\) and \(\phi > 0\), which we will call \(\text{Beta2}\):

\[ \text{Beta2}(\mu, \phi) = \text{Beta}(\mu \phi, (1-\mu) \phi) \]

The parameters \(\mu\) and \(\phi\) specify the mean and precision parameter, respectively. By defining

\[ \mu_i = \frac{\exp(\eta_i)}{1 + \exp(\eta_i)} \]

we still predict the expected probability by means of our transformed linear predictor (as in the original binomial model), but account for potential overdispersion via the parameter \(\phi\).

Fitting Custom Family Models

The beta-binomial distribution is natively supported in brms nowadays, but we will still use it as an example to define it ourselves via the custom_family function. This function requires the family’s name, the names of its parameters (mu and phi in our case), corresponding link functions (only applied if parameters are predicted), their theoretical lower and upper bounds (only applied if parameters are not predicted), information on whether the distribution is discrete or continuous, and finally, whether additional non-parameter variables need to be passed to the distribution. For our beta-binomial example, this results in the following custom family:

beta_binomial2 <- custom_family(
  "beta_binomial2", dpars = c("mu", "phi"),
  links = c("logit", "log"),
  lb = c(0, 0), ub = c(1, NA),
  type = "int", vars = "vint1[n]"
)

The name vint1 for the variable containing the number of trials is not chosen arbitrarily as we will see below. Next, we have to provide the relevant Stan functions if the distribution is not defined in Stan itself. For the beta_binomial2 distribution, this is straight forward since the ordinal beta_binomial distribution is already implemented.

stan_funs <- "
  real beta_binomial2_lpmf(int y, real mu, real phi, int T) {
    return beta_binomial_lpmf(y | T, mu * phi, (1 - mu) * phi);
  }
  int beta_binomial2_rng(real mu, real phi, int T) {
    return beta_binomial_rng(T, mu * phi, (1 - mu) * phi);
  }
"

For the model fitting, we will only need beta_binomial2_lpmf, but beta_binomial2_rng will come in handy when it comes to post-processing. We define:

stanvars <- stanvar(scode = stan_funs, block = "functions")

To provide information about the number of trials (an integer variable), we are going to use the addition argument vint(), which can only be used in custom families. Similarly, if we needed to include additional vectors of real data, we would use vreal(). Actually, for this particular example, we could more elegantly apply the addition argument trials() instead of vint()as in the basic binomial model. However, since the present vignette is meant to give a general overview of the topic, we will go with the more general method.

We now have all components together to fit our custom beta-binomial model:

fit2 <- brm(
  incidence | vint(size) ~ period + (1|herd), data = cbpp,
  family = beta_binomial2, stanvars = stanvars
)

The summary output reveals that the uncertainty in the coefficients of period is somewhat larger than in the basic binomial model, which is the result of including the overdispersion parameter phi in the model. Apart from that, the results looks pretty similar.

summary(fit2)
 Family: beta_binomial2 
  Links: mu = logit; phi = identity 
Formula: incidence | vint(size) ~ period + (1 | herd) 
   Data: cbpp (Number of observations: 56) 
  Draws: 4 chains, each with iter = 2000; warmup = 1000; thin = 1;
         total post-warmup draws = 4000

Multilevel Hyperparameters:
~herd (Number of levels: 15) 
              Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept)     0.38      0.25     0.02     0.92 1.00     1054     2127

Regression Coefficients:
          Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept    -1.34      0.26    -1.87    -0.83 1.00     3201     1841
period2      -1.01      0.40    -1.81    -0.23 1.00     4079     2545
period3      -1.27      0.46    -2.26    -0.42 1.00     4089     2713
period4      -1.54      0.53    -2.63    -0.57 1.00     3565     2067

Further Distributional Parameters:
    Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
phi    16.52     12.23     5.31    47.08 1.00     1831     1641

Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).

Post-Processing Custom Family Models

Some post-processing methods such as summary or plot work out of the box for custom family models. However, there are three particularly important methods, which require additional input by the user. These are posterior_epred, posterior_predict and log_lik computing predicted mean values, predicted response values, and log-likelihood values, respectively. They are not only relevant for their own sake, but also provide the basis of many other post-processing methods. For instance, we may be interested in comparing the fit of the binomial model with that of the beta-binomial model by means of approximate leave-one-out cross-validation implemented in method loo, which in turn requires log_lik to be working.

The log_lik function of a family should be named log_lik_<family-name> and have the two arguments i (indicating observations) and prep. You don’t have to worry too much about how prep is created (if you are interested, check out the prepare_predictions function). Instead, all you need to know is that parameters are stored in slot dpars and data are stored in slot data. Generally, parameters take on the form of a \(S \times N\) matrix (with \(S =\) number of posterior draws and \(N =\) number of observations) if they are predicted (as is mu in our example) and a vector of size \(N\) if the are not predicted (as is phi).

We could define the complete log-likelihood function in R directly, or we can expose the self-defined Stan functions and apply them. The latter approach is usually more convenient, but the former is more stable and the only option when implementing custom families in other R packages building upon brms. For the purpose of the present vignette, we will go with the latter approach.

expose_functions(fit2, vectorize = TRUE)

and define the required log_lik functions with a few lines of code.

log_lik_beta_binomial2 <- function(i, prep) {
  mu <- brms::get_dpar(prep, "mu", i = i)
  phi <- brms::get_dpar(prep, "phi", i = i)
  trials <- prep$data$vint1[i]
  y <- prep$data$Y[i]
  beta_binomial2_lpmf(y, mu, phi, trials)
}

The get_dpar function will do the necessary transformations to handle both the case when the distributional parameters are predicted separately for each row and when they are the same for the whole fit.

With that being done, all of the post-processing methods requiring log_lik will work as well. For instance, model comparison can simply be performed via

loo(fit1, fit2)
Output of model 'fit1':

Computed from 4000 by 56 log-likelihood matrix.

         Estimate   SE
elpd_loo    -99.7 10.1
p_loo        21.9  4.3
looic       199.4 20.2
------
MCSE of elpd_loo is NA.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 1.6]).

Pareto k diagnostic values:
                         Count Pct.    Min. ESS
(-Inf, 0.7]   (good)     52    92.9%   367     
   (0.7, 1]   (bad)       4     7.1%   <NA>    
   (1, Inf)   (very bad)  0     0.0%   <NA>    
See help('pareto-k-diagnostic') for details.

Output of model 'fit2':

Computed from 4000 by 56 log-likelihood matrix.

         Estimate   SE
elpd_loo    -94.6  8.2
p_loo        10.3  1.9
looic       189.1 16.4
------
MCSE of elpd_loo is NA.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 1.2]).

Pareto k diagnostic values:
                         Count Pct.    Min. ESS
(-Inf, 0.7]   (good)     55    98.2%   362     
   (0.7, 1]   (bad)       1     1.8%   <NA>    
   (1, Inf)   (very bad)  0     0.0%   <NA>    
See help('pareto-k-diagnostic') for details.

Model comparisons:
     elpd_diff se_diff
fit2  0.0       0.0   
fit1 -5.1       4.3   

Since larger ELPD values indicate better fit, we see that the beta-binomial model fits somewhat better, although the corresponding standard error reveals that the difference is not that substantial.

Next, we will define the function necessary for the posterior_predict method:

posterior_predict_beta_binomial2 <- function(i, prep, ...) {
  mu <- brms::get_dpar(prep, "mu", i = i)
  phi <- brms::get_dpar(prep, "phi", i = i)
  trials <- prep$data$vint1[i]
  beta_binomial2_rng(mu, phi, trials)
}

The posterior_predict function looks pretty similar to the corresponding log_lik function, except that we are now creating random draws of the response instead of log-likelihood values. Again, we are using an exposed Stan function for convenience. Make sure to add a ... argument to your posterior_predict function even if you are not using it, since some families require additional arguments. With posterior_predict to be working, we can engage for instance in posterior-predictive checking:

pp_check(fit2)

When defining the posterior_epred function, you have to keep in mind that it has only a prep argument and should compute the mean response values for all observations at once. Since the mean of the beta-binomial distribution is \(\text{E}(y) = \mu T\) definition of the corresponding posterior_epred function is not too complicated, but we need to get the dimension of parameters and data in line.

posterior_epred_beta_binomial2 <- function(prep) {
  mu <- brms::get_dpar(prep, "mu")
  trials <- prep$data$vint1
  trials <- matrix(trials, nrow = nrow(mu), ncol = ncol(mu), byrow = TRUE)
  mu * trials
}

A post-processing method relying directly on posterior_epred is conditional_effects, which allows to visualize effects of predictors.

conditional_effects(fit2, conditions = data.frame(size = 1))

For ease of interpretation we have set size to 1 so that the y-axis of the above plot indicates probabilities.

Turning a Custom Family into a Native Family

Family functions built natively into brms are safer to use and more convenient, as they require much less user input. If you think that your custom family is general enough to be useful to other users, please feel free to open an issue on GitHub so that we can discuss all the details. Provided that we agree it makes sense to implement your family natively in brms, the following steps are required (foo is a placeholder for the family name):